2Wire Inline Filter Instrukcja instalacji
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria sieciowe 2Wire Inline Filter. 2Wire Inline Filter 2 stron. 2wire inline filter filter: install guide
Drukuj stronęDSL Filter Installation Guide
Usage
•
The 2Wire DSL Filter is designed to work with G.lite
ADSL, Full-rate G.dmt ADSL, and home phoneline
computer networks (HPNA 1.0 and HPNA 2.0).
•
The DSL Filter should be used with all telephones,
fax machines, answering machines, and analog
modems that share a DSL line or use home
phoneline computer networks (HPNA) or both.
•
One filter is required for each telephone device
(any telephone, fax machine, answering machine,
or analog modem). If several telephone devices are
connected to the same telephone wall jack, only
one filter is needed and it must be located
between the first device and the wall jack.
•
IMPORTANT: The DSL Filter should not be used
with either a DSL modem or a Home phoneline
network adapter as it will isolate the networking
device from the telephone line.
Filter installation
•
To install the DSL Phoneline filter, simply connect
the cable from your telephone device to the 2Wire
DSL Filter, then connect the cable from the filter to
your telephone wall jack.
For more information on using 2Wire DSL Filters, as well as general DSL and home phoneline (HPNA)
information, visit www.2Wire.com.
1