Avtron HS35A Instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Konwerter mediów Avtron HS35A. Avtron HS35A 7 stron. 1/2 inch to 1 inch [12mm-25mm] hollow shaft
Drukuj stronę
Pin & Block Tether Option "R"
TETHER OPTION "E","M"
FAN COVER MOUNT WITH 10MM SQUARE GRILLE OPTION "1"
SHEET METAL SCREW, #14
FLAT WASHER
WASHER SET, MOLDED,
1/4" HARDWARE
GROMMET NUT, 3/8" [10mm] HOLE,
1/4-20 [M6] THRD.
3.38
[85.70]
[76.20]
Nidec-Avtron Makes the Most Reliable Encoders in the World
8 9 0 1 E . P L E A S A N T VA L L E Y R O A D • I N D E P E N D E N C E , O H I O 4 4 1 3 1 - 5 5 0 8
T E L E P H O N E : ( 1 ) 2 1 6 - 6 4 2 - 1 2 3 0 • F A X : ( 1 ) 2 1 6 - 6 4 2 - 6 0 3 7
E - M A I L : t a c h s @ n i d e c - a v t r o n . c o m • W E B : w w w . a v t r o n e n c o d e r s . c o m
Tether/Antirotation/Protection Options
TETHER, 8.50 C-FACE
KIT, TETHER
MOUNTING
2.36
[60.00]
0.67 [17.00]
3.44
[87.30]
3.00
0.50
45°
[12.83]
ANTI-ROTATION TETHER
OPTION "E"
15°
120°
TETHER OPTION "F","M"
[45.20]
3.38
[85.70]
1.00 [25.40]
3.00
[76.20]
Motor shaft tolerance to be +0.0000/-0.0005 [+0.0000/-0.0127] per NEMA Std. MG1.
All dimensions are in inches [millimeters]. All dimensions are approx.
Nidec standard warranty applies. Copies available upon request.
HS35A
7
TETHER OPTION "A","B","C","D","M"
TETHER OPTION "A"
*NOTE: If encoder is positioned more than
0.13 [3.30] from motor, additional flat washers
may be required to achieve a "no stress"
tether position.
4.19
[106.50]
0.30
[7.50]
6.60
[167.60]
OPTIONAL PROTECTIVE
BASKET GUARD
1.78
0.67 [17.00]
4.56 [115.80]
2.20
1.80
[55.90]
[45.70]
0.50 [12.83]
45°
ANTI-ROTATION TETHER
OPTION "A","B","C","D","F"
15°
120°
Specifications subject to change without notice.
REV: 06-12-2018
1.00 [25.40]