Dell E05B001 Podręcznik referencyjny - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Serwer Dell E05B001. Dell E05B001 29 stron.

Drukuj stronę

○ Support for drive partitions larger than 2 TB.

○ Enhanced security (e.g., UEFI Secure Boot).

○ Faster boot time.

NOTE:

You must use only the UEFI boot mode in order to boot from NVMe drives.

View Boot Settings

To view the Boot Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Boot Settings.

Boot Settings details

About this task

The Boot Settings screen details are explained as follows:

Option

Description

Boot Mode

Allows you to configure the Boot Sequence and Enable or Disable the individual boot options. The

available options are BIOS and UEFI. The option is set to UEFI by default.

Boot Sequence

Enables or disables the Boot Sequence Retry feature. If the last attempt to boot has failed, the system

Retry

immediately performs a cold reset or retries to boot after 30 seconds time-out period base on the setting

of Reset or Enabled. This option is set to Enabled by default.

Hard-Disk

Specifies the drive that is booted in the event of a drive failure. The devices are selected in the Hard-

Failover

Disk Drive Sequence on the Boot Option Setting menu. When this option is set to Disabled, only the

first drive in the list is attempted to boot. When this option is set to Enabled, all drives are attempted to

boot in the order selected in the Hard-Disk Drive Sequence. This option is not enabled for UEFI Boot

Mode. This option is set to Disabled by default.

Generic USB

Enables or disables the USB boot option. This option is set to Disabled by default.

Boot

Hard-disk Drive

Enables or disables the Hard-disk Drive Placeholder option. This option is set to disabled by default.

Placeholder

UEFI Boot Settings

The UEFI Boot Settings screen enables you to specify the UEFI boot order.

About this task

Option

Description

UEFI Boot

Enables you to change the UEFI boot device order.

Sequence

Boot Options

Enables you to enable or disable the UEFI boot devices.

Enable/Disable

BIOS and UEFI