Dell E45S003 Podręcznik referencyjny - Strona 22

Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Serwer Dell E45S003. Dell E45S003 23 stron.

Drukuj stronę

Table 26. Miscellaneous Settings details

Option

System Time

System Date

Asset Tag

Keyboard NumLock

F1/F2 Prompt on Error

Load Legacy Video Option ROM

Dell Wyse P25/P45 BIOS Access

Power Cycle Request

iDRAC Settings utility

The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable

various iDRAC parameters by using the iDRAC settings utility.

NOTE:

Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License upgrade.

For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at

www.dell.com/idracmanuals.

Device Settings

Device Settings enables you to configure device parameters such as storage controllers or network cards.

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) provides advanced embedded systems management capabilities including system deployment,

configuration, update, maintenance, and diagnosis. LC is delivered as part of the iDRAC out-of-band solution and Dell system

embedded Unified Extensible Firmware Interface (UEFI) applications.

Embedded system management

The Dell Lifecycle Controller provides advanced embedded system management throughout the lifecycle of the system. The Dell

Lifecycle Controller is started during the boot sequence and functions independently of the operating system.

NOTE:

Certain platform configurations may not support the full set of features provided by the Dell Lifecycle Controller.

For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the

operating system, see the Dell Lifecycle Controller documentation at https://www.dell.com/idracmanuals.

Pre-operating system management applications

Description

Enables you to set the time on the system.

Enables you to set the date on the system.

Specifies the asset tag and enables you to modify it for security and tracking

purposes.

Enables you to set whether the system boots with the NumLock enabled or

disabled. This option is set to On by default.

NOTE:

This option does not apply to 84-key keyboards.

Enables or disables the F1/F2 prompt on error. This option is set to Enabled by

default. The F1/F2 prompt also includes keyboard errors.

Enables or disables the Load Legacy Video Option ROM option. This option is

set to Disabled by default.

Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to

Enabled by default.

Enables or disables the Power Cycle Request. This option is set to None by

default.

https://