Dell EMC PowerEdge R7515 Podręcznik referencyjny - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik referencyjny dla Serwer Dell EMC PowerEdge R7515. Dell EMC PowerEdge R7515 22 stron.
Drukuj stronę
Table 3. System Information details (continued)
Option
System CPLD Version
UEFI Compliance Version
AGESA Version
SMU Version
DXIO Version
Memory Settings
To view the Memory Settings screen, power on the system, press F2, and click System Setup Main Menu > System BIOS
> Memory Settings.
Table 4. Memory Settings details
Option
System Memory Size
System Memory Type
System Memory Speed
System Memory Voltage
Video Memory
System Memory Testing
DRAM Refresh Delay
Memory Operating Mode
Current State of Memory Operating Mode
Memory Interleaving
Opportunistic Self-Refresh
Correctable Error Logging
Processor Settings
To view the Processor Settings screen, power on the system, press F2, and click System Setup Main Menu > System
BIOS > Processor Settings.
6
Pre-operating system management applications
Description
Specifies the current version of the system complex programmable
logic device (CPLD) firmware.
Specifies the UEFI compliance level of the system firmware.
Specifies the AGESA reference code version.
Specifies the SMU firmware version.
Specifies the DXIO firmware version.
Description
Specifies the memory size in the system.
Specifies the type of memory installed in the system.
Specifies the system memory speed.
Specifies the system memory voltage.
Specifies the amount of video memory.
Specifies whether the system memory tests are run during system boot.
The two options available are Enabled and Disabled. This option is set to
Disabled by default.
By enabling the CPU memory controller to delay running the REFRESH
commands, you can improve the performance for some workloads. By
minimizing the delay time, it is ensured that the memory controller runs
the REFRESH command at regular intervals. For Intel-based servers, this
setting only affects systems configured with DIMMs which use 8 Gb
density DRAMs. This option is set to Minimum by default.
Specifies the memory operating mode. The option is available and is set to
Optimizer Mode, by default.
Specifies the mode selected in the memory operating mode.
Enables or disables the memory interleaving option. The two options
available are Auto and Disabled. This option is set to Auto by default.
Enables or disables opportunistic self-refresh feature. This option is set to
Disabled by default.
Enables or disables correctable error logging. This option is set to
Enabled by default.