Dell EMC PowerEdge R940 Instrukcja - Strona 5
Przeglądaj online lub pobierz pdf Instrukcja dla Serwer Dell EMC PowerEdge R940. Dell EMC PowerEdge R940 10 stron. Upgrading the dual processor to quad processor system
Również dla Dell EMC PowerEdge R940: Usługa (14 strony)
Drukuj stronę
Figure 3. Installing PEM power board
6
Place the heat sinks, processors, and processor brackets for installation on the static-safe work table.
NOTE:
The heat sinks, processors, processor brackets, and memory DIMMs are not part of the kit. They have to be
ordered separately.
7
Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
NOTE:
Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing
the bracket on the processor.
Upgrading the dual processor to quad processor system for the PowerEdge R940
5