Dell PERC 2/Si Instrukcja aktywacji - Strona 6
Przeglądaj online lub pobierz pdf Instrukcja aktywacji dla Serwer Dell PERC 2/Si. Dell PERC 2/Si 8 stron. Activating the dell perc2 poweredge expandable raid controller
Drukuj stronę1-4
Dell PowerEdge 2400 Systems—Activating the Dell PowerEdge Expandable RAID Controller 2/Si
1
RAID hardware key
2
Latches (2)
3
Socket
8.
Replace the cooling shroud and computer cover, and then reconnect the com-
puter and peripherals to their AC power sources and turn them on.
9.
Press <F2> immediately after you see the following message:
<F2> = System Setup
If you wait too long and your operating system begins to load into memory, let
the system complete the load operation; then shut down the system and try
again.
For more information on the System Setup program, see "Using the System
Setup Program" in your system User's Guide.
NOTE: To ensure an orderly system shutdown, consult the documentation that
accompanied your operating system.
10. Press <Alt> <p> to switch to Page 2 of the System Setup screen.
11. If the Onboard RAID option is displayed, select this option.
If the Primary SCSI option is displayed, the integrated RAID controller was not
detected; go to step 1 and repeat all installation steps.