Dell PowerEdge 1950 Instrukcja instalacji - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Dell PowerEdge 1950. Dell PowerEdge 1950 10 stron. Trusted platform module (tpm) update
Również dla Dell PowerEdge 1950: Aktualizacja informacji (50 strony), Informacje o instalacji (11 strony), Aktualizacja (2 strony)
Drukuj stronę
Figure 1-3. SATA Cable Routing in the PowerEdge 1950
1
1
SATA data cable
3
chipset shroud
5
SATA power cable
5 Reinstall the SAS controller daughter card and reconnect the SAS cable.
See "SAS Controller Daughter Card" in your Hardware Owner's Manual.
6 Close the system. See "Closing the System" in your Hardware Owner's
Manual.
7 Reconnect the system to power and turn on the system and attached
peripherals.
Installing the SATA Optical Drive – PowerEdge 2970 or 2950
1 Insert the optical drive tray into the system until it is fully inserted and
locked into position.
2 Connect the SATA cable (the end with the branching power cable) to the
back of the optical drive.
3 Connect the branching power cable to the power supply connector.
6
5
2
SATA_A connector on system board
4
system fans
6
optical drive
Installing a SATA Optical Drive
2
3
4
7