Dell PowerEdge 1955 Skrócona instrukcja obsługi - Strona 5
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Serwer Dell PowerEdge 1955. Dell PowerEdge 1955 12 stron. Using dell blade servers in a dell poweredge high availability cluster
Również dla Dell PowerEdge 1955: Instrukcja obsługi (44 strony)
Drukuj stronę
The nonport (system) LEDs show switch-level information.
Figure 2
SilkWorm 4016 Nonport Side
1
Module controller (DRAC/MC) status
2
Switch status
3
Power and system status
Unpacking the SilkWorm 4016
To remove the SilkWorm 4016 from its shipping package:
1.
Open the shipping box and inspect the contents for damage.
Do not install a damaged unit: if the unit is damaged, contact your Dell sales representative.
2.
Remove the cardboard accessory tray that sits on top of the SilkWorm 4016.
3.
Remove the switch from the box.
The protective foam ends will slide out with the switch.
4.
Remove the foam ends from the switch.
5.
Slide the SilkWorm 4016 out of the antistatic sleeve.
Inserting the SilkWorm 4016 into a PowerEdge
1855 Chassis
To insert the SilkWorm 4016 into a PowerEdge 1855 chassis:
1.
Unpack the SilkWorm 4016 from its shipping box as described earlier.
2.
Verify that the chassis I/O bay (bay 3 or bay 4) into which the SilkWorm 4016 is being inserted is empty. If necessary,
install the SFP modules according to the manufacturer's documentation.
SilkWorm 4016 Quickstart Guide
Publication Number: Publication Number: 53-100051-01
10
5 of 12