Dell PowerEdge 2410 Podręcznik - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla Serwer Dell PowerEdge 2410. Dell PowerEdge 2410 9 stron. Cabling poweredge t610
Również dla Dell PowerEdge 2410: Podręcznik (20 strony), Podręcznik (20 strony), Podręcznik (17 strony), Podręcznik (12 strony), Podręcznik (10 strony), Podręcznik (10 strony), Podręcznik (9 strony), Podręcznik (10 strony), Podręcznik (12 strony), Podręcznik (11 strony), Podręcznik (8 strony)

Cabling the Dell™ PowerEdge™ R710

Figure 3: Routing the Cables Through the CMA

NOTE: Do not store excess

cable slack inside the CMA.

The cable may protrude

through the CMA causing

binding and potentially

damaging the cable.

3. Once all the cables are routed through the CMA, dress the cables between the back of the system and the

entrance of the CMA with the tie wraps provided in the CMA kit. The tie wraps are shown in yellow in all

illustrations.

4. Clip off the excess length of material from the tie wraps and make sure that the tie wraps are positioned to

avoid interference with adjacent systems.

5. Return the CMA to the closed (retracted) position.

6. Extend the system from the rack to verify there is sufficient slack in the cables at both the entrance and exit of

the CMA.

7. See Figure 4 for an example of a completed left side mounted CMA installation.

Cables entering CMA should

have a small amount of slack

to avoid cable strain when

CMA is extended.

Page 4