Dell PowerEdge 4220 Podręcznik - Strona 10

Przeglądaj online lub pobierz pdf Podręcznik dla Serwer Dell PowerEdge 4220. Dell PowerEdge 4220 12 stron. Rack enclosures
Również dla Dell PowerEdge 4220: Podręcznik (20 strony), Podręcznik (20 strony), Podręcznik (17 strony), Podręcznik (12 strony), Podręcznik (10 strony), Podręcznik (10 strony), Podręcznik (9 strony), Podręcznik (9 strony), Podręcznik (10 strony), Podręcznik (12 strony), Podręcznik (11 strony), Podręcznik (8 strony), Specyfikacje (2 strony), Podręcznik techniczny (37 strony), Podręcznik szybkiej konfiguracji (2 strony)

Cable Routing Procedures for Dell™ PowerEdge™ R310 & R410 Systems

Section 3: Replacing a Power Supply on a PowerEdge™ R310 or R410 System

With a CMA

Remove the tray from underneath the CMA as described in the

provided with the CMA kit.

2. Swing the CMA into the service position.

3. Disconnect the power cord from the power supply and disengage the strain relief.

4. If the CMA is attached to the left side, both power supplies can be removed without

disconnecting the CMA.

5. If the CMA is attached to the right side and the inner power supply needs to be replaced, the

CMA does not need to be disconnected.

6. If the CMA is attached to the right side and the outer power supply needs to be replaced:

a. Disconnect the inner CMA bracket from the rail as shown in Figure 10.

b. While supporting the CMA with one hand, remove and replace the power supply with

the other hand as shown in Figure 11.

c. Reinstall the inner CMA bracket to reconnect the CMA.

7. After the power supply has been replaced, plug in the power cord, re-engage the strain relief,

replace the CMA support tray, and return the CMA to the closed (retracted) position.

CMA Installation Instructions

Page 8