Dell PowerEdge C6100 Korzystanie z instrukcji - Strona 6
Przeglądaj online lub pobierz pdf Korzystanie z instrukcji dla Serwer Dell PowerEdge C6100. Dell PowerEdge C6100 48 stron. Poweredge series
Również dla Dell PowerEdge C6100: Podręcznik portfolio (27 strony)
Watchdog and Automatic System Recovery
The BMC watchdog timer commands, as defined in the IPMI v2.0 specification, are part of the
Intelligent Platform Management Interface. The watchdog timer can restart, turn off, or cycle
power to your server in your absence to support automatic system recovery functions. If a
pre-set interval expires, the configured timer actions are executed and logged into SEL for later
examination. The timer commands are:
•
System reset
•
System power off
•
System power cycle
•
Host diagnostic interrupt
NOTE:
The software that acquired and activated the watchdog timer is responsible for resetting the
timer countdown.
Virtual Storage
The firmware supports USB diskette, keyboard, mouse, and CD/DVD. These are supported as a
composite device. The USB keyboard and mouse traffic is bridged to the KVM connections.
Using the Web User Interface
The embedded console client provides KVM/IP functionality. The client is in the form of an
ActiveX control for the Windows
NOTE:
The application must be installed before completing the console redirection.
A web-based graphic user interface (GUI) is supported on the following browsers:
•
Windows platforms: Internet Explorer
•
All platforms: Firefox 2.0017 or later
NOTE:
Before using the Web user interface, ensure that the firewall settings are configured to enable
access to the following: KVM:7578, USB–CDROM:5120, and USB–Floppy:5123.
Logging into the Web User Interface
Enter the BMC-embedded server IP address or URL into the address bar of the web browser. The
BMC interface has a default of (DHCP\Static). Press the <F2> key to enter the system BIOS
setup and change these settings.
6
Using the Baseboard Management Controller
®
platform and an application for the Linux
®
6.0 or later
®
platform.