Allied Telesis AT-9800 Series Jak skonfigurować - Strona 7
Przeglądaj online lub pobierz pdf Jak skonfigurować dla Oprogramowanie Allied Telesis AT-9800 Series. Allied Telesis AT-9800 Series 9 stron. How to set up pppoe between a linux client and access concentrator
Również dla Allied Telesis AT-9800 Series: Uwaga dotycząca wydania (5 strony), Podręcznik szybkiej instalacji (12 strony), Jak to zrobić (8 strony)
Drukuj stronę
Distribution switch 1 configuration
The LAN off this switch uses VLAN 1. This exists by default, so you only need to change
ports 1 and 2 to tagged ports and enable STP. STP is necessary because each distribution
switch forms a loop with the two core switches.
Distribution switch 2 configuration
The LAN off this switch uses VLAN 2, which you need to create.
Distribution switch 3 configuration
The LAN off this switch uses VLAN 3, which you need to create.
Page 7 | AlliedWare™ OS How To Note: VRRP
set system name=distro1
enable stp=default
set stp=default mode=rapid
set vlan=1 port=1-2 frame=tagged
set system name=distro2
create vlan=vlan2 vid=2
add vlan=2 port=3-24
add vlan=2 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
set system name=distro3
create vlan=vlan3 vid=3
add vlan=3 port=3-24
add vlan=3 port=1-2 frame=tagged
enable stp=default
set stp=default mode=rapid
Distribution switch 1 configuration