Dell PowerEdge FX2 Podręcznik konfiguracji - Strona 22
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Serwer Dell PowerEdge FX2. Dell PowerEdge FX2 24 stron. Upgrading from 10gbe pass-through modules to fn410s i/o modules
Również dla Dell PowerEdge FX2: Pierwsze kroki (2 strony), Rozpoczęcie pracy z systemem (2 strony)
Drukuj stronę
D.4
Full-width servers with dual-port CNAs
The PowerEdge FC830 is an example of a full-width server. For full-width servers with dual-port CNAs
installed, the CNA ports map to two ports on each FN IOM. Figure 14 and Table 4 present the port mapping
for full-width servers with dual-port CNAs.
Server Slot
1
3
22
PowerEdge FX2 - Upgrading from 10GbE Pass-through Modules to FN410S I/O Modules | version 1.0
FN IOM A1 (Top)
Internal Ports
1
5
Full-width servers with dual-port CNAs
Full-width servers with dual-port CNAs
FN IOM A1 (Top)
Internal Port Numbers
1 , 3
5 , 7
Slot 1
Slot 3
3
4
2
6
7
8
FN IOM A2 (Bottom)
Internal Port Numbers
1 , 3
5 , 7
FN IOM A2 (Bottom)
Internal Ports
3
4
1
2
6
7
8
5