Dell PowerEdge PDU Metered LCD Podręcznik - Strona 3

Przeglądaj online lub pobierz pdf Podręcznik dla Serwer Dell PowerEdge PDU Metered LCD. Dell PowerEdge PDU Metered LCD 11 stron. Site planning guide
Również dla Dell PowerEdge PDU Metered LCD: Podręcznik (11 strony), Podręcznik (11 strony), Podręcznik (9 strony), Podręcznik planowania witryny (8 strony)

Drukuj stronę

Dell PowerEdge PDU Metered LCD Podręcznik

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems

Contents

Introduction ............................................................................................................. 4

Section 1: Cabling a PowerEdge R320 or R420 system with a CMA ............................................ 4

1.1.

Connecting the cables to the system ................................................................... 4

1.2.

Routing the power cables through the strain reliefs ................................................. 5

1.3.

Installing the CMA .......................................................................................... 5

Section 2: Replacing a hot swap power supply on a PowerEdge R320 or R420 system with a CMA ..... 8

2.1.

Replacing a hot swap power supply with a left-side mounted CMA ............................... 8

2.2.

Replacing a hot swap power supply with a right-side mounted CMA ............................. 8

Section 3: Cabling a PowerEdge R320 or R420 system on sliding rails without a CMA ................... 10

3.1.

Routing the cables ....................................................................................... 10

3.2.

Removing the outer CMA brackets for shallow racks .............................................. 10

Section 4: Cabling a PowerEdge R320 or R420 system installed on static rails ........................... 11

Figures

Figure 1.

System with cables installed ............................................................................. 4

Figure 2.

Routing power cables through the strain reliefs on hot swap power supplies .................. 5

Figure 3.

Routing power cable through the strain relief on fixed power supply ............................ 5

Figure 4.

Attaching the inner CMA attachment bracket ........................................................ 6

Figure 5.

Routing the cables through the CMA .................................................................... 6

Figure 6.

Left-side mounted CMA installation (preferred) ...................................................... 7

Figure 7.

Right-side mounted CMA installation ................................................................... 7

Figure 8.

Disconnecting the CMA attachment housings ......................................................... 9

Figure 9.

Replacing the outer power supply ...................................................................... 9

Figure 10. Cable routing on sliding rails without a CMA ........................................................ 10

Figure 11. Removing the outer CMA brackets for shallow racks .............................................. 10

Figure 12. Cabling a system installed in static rails ............................................................. 11