Dell PowerEdge R640XL Podręcznik konfiguracji - Strona 24
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Serwer Dell PowerEdge R640XL. Dell PowerEdge R640XL 27 stron. Security analytics gen14 dell hardware by symantec
Drukuj stronę
Configure Capture and Indexing Filesystems
The following procedure installs filesystems on storage arrays so they can be used for Capture and Indexing.
To configure Capture and Indexing arrays on a storage array:
1. Log on to the Sensor's Linux console, or SSH to the Sensor, with the following credentials: root | 5o1Er@*
2. Enter the following command to detect the storage array's available drives and drive space:
/usr/local/sbin/powervault_build_system_commands.py
The SA-STAG8-2U144 returns the following results with the indicated Capture Devices and Index Devices and the
available storage space for each:
Restarting multipathd
Stopping multipathd
Rescanning the Host Bus Adapters
Rescanning HBA: /sys/class/sas_host/host1/device/scsi_host/host1/scan
Starting multipathd
The following dm- devices are now detected by the host
21T 3600c0ff00051d227691f295f01000000 dm-1 DellEMC ,ME4
85T 3600c0ff00051d1a8701f295f01000000 dm-0 DellEMC ,ME4
WARNING: fdisk GPT support is currently new, and therefore in an experimental phase. Use at your
own discretion.
Capture size 93900.0
Index size 23400.0
Capture Devices
dm-0 size 93900.0
Index Devices
dm-1 size 23400.0
*****************************************************************************
Run the following commands to build the capture and index volumes
*****************************************************************************
mv -f /etc/solera/config/capture-config /etc/solera/config/capture-config.old
mv -f /etc/solera/config/index-config /etc/solera/config/index-config.old
build-ds-capture
build-ds-index -M dm-1
reboot
dm-0
Security Analytics
Configuration Guide
Gen14 Dell Hardware
24