DH Lifelabs Sciaire Pro H100 Instrukcja obsługi - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Jonizator powietrza DH Lifelabs Sciaire Pro H100. DH Lifelabs Sciaire Pro H100 6 stron.

NOTE: You can magnetize the air ion generator by the magnets

on the mounting flanges to attach on the air system.

Electrical Installation

WARNING: DO NOT CONNECT TO POWER

BEFORE INSTALLATION IS COMPLETE. ALWAYS

DISCONNECT POWER (INCLUDING LIVE AND

NEUTRAL CONDUCTOR) TO THE UNIT BEFORE

HANDLING THE AIR ION GENERATOR.

1. All field wiring to be in accordance with NEC and

Authorities Having Jurisdiction (AHJ).

/ All wiring needs to be in accordance with the current

I.E.E. Regulations, or the appropriate standards of your

country and MUST be installed by a suitably qualified

person. (For UK market)

(For US market)

2. It is recommended that surge protection be

installed with this air ion generator at the

equipment level, building level, or circuit breaker

panel feeding the product.

3. If a step-down transformer is used to feed the air

ion generator, the transformer must be grounded

(recommended 20 VA minimum).

4. Do not install the air ion generator on the same

circuit as a UV Lamp or connect to the same

transformer as a UV Lamp.

5. Connect power to the air ion generator using

appropriate voltage.

6. The installer shall provide a power source that

is properly grounded per the local AHJ.

market) / Ensure that the mains supply (Voltage,

Frequency) complies with the rating label. (For UK

market)

7. For best results interlock air ion generator with fan

power.

8. Apply power to the device. Confirm that green

indicator light illuminates indicating that the air ion

generator is functioning properly.

(For US