Dell PowerEdge systems 6300 Instrukcja wymiany - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Serwer Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 3 stron. Systems 1 x 2 backplane
Również dla Dell PowerEdge systems 6300: Informacje o instalacji (6 strony), Instrukcja instalacji (28 strony), Instalacja stojaka (37 strony), Podręcznik użytkownika (42 strony), Instrukcja instalacji (8 strony), Instalacja stojaka (34 strony), Instrukcja instalacji (12 strony), Informacje o instalacji (6 strony)

Drukuj stronę
Dell PowerEdge systems 6300 Instrukcja wymiany
To remove the power supply from your system, perform the following steps:
1.
Disconnect the AC power cable from the power outlet and the power supply.
2.
Remove the AC power cable from the cable strain-relief clips.
3.
Press down on the handle release in the middle of the power supply handle,
rotate the handle to the open position, and pull the power supply out of the
chassis.
____________________
Information in this document is subject to change without notice.
© 1999 Dell Computer Corporation. All rights reserved. Printed in the U.S.A.
Trademarks used in this text: Dell , the DELL logo, and PowerEdge are trademarks of Dell Com-
puter Corporation. Other trademarks and trade names may be used in this document to refer to
either the entities claiming the marks and names or their products. Dell Computer Corporation
disclaims any proprietary interest in trademarks and trade names other than its own.