Dell PowerVault DR4100 Podręcznik najlepszych praktyk - Strona 36

Przeglądaj online lub pobierz pdf Podręcznik najlepszych praktyk dla Serwer Dell PowerVault DR4100. Dell PowerVault DR4100 41 stron. Backup and recovery appliance
Również dla Dell PowerVault DR4100: Podręcznik dla początkujących (10 strony), Podręcznik (37 strony), Uwaga dotycząca wydania (16 strony), Podręcznik (12 strony), Podręcznik (24 strony), Podręcznik (23 strony), Konfiguracja Qiuck (1 strony), Podręcznik (27 strony), Podręcznik (25 strony)

Drukuj stronę
Dell PowerVault DR4100 Podręcznik najlepszych praktyk
6.
Establish replication from Seattle1 to Lansing1 using the following command:
replication --add --name < container-name> --role <source | target> --peer <IP address> --
replication_traffic <ip address | hostname> --encryption <none | aes128 | aes256>
7.
On Lansing2 add replication to the 10GB bond using the following command:
system –replication_traffic --add --interface <bond(0-N) | eth(0-N) | lo#>
 
8.
Create a route from Lansing2 to Lansing1 using the following command:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
9.
Create a route from Lansing1 to Lansing2 using the following commands:
network --route --add --network <destination_network> --gateway <gateway addresses> --interface
<bond(0-N) | eth(0-N) | lo#>
10. Establish replication from Lansing1 to Lansing2 using the following command:
replication --add --name < container-name> --role <source | target> --peer <IP address> --
replication_traffic <ip address | hostname> --encryption <none | aes128 | aes256>
36
DR4100 Best Practice Guide | April 2014
administrator@Seattle1 > replication --add --name backup --role source --peer <IP of 1G
Bond of Lansing1> --replication_traffic <ip address of local 1G interface to be used for
replication| hostname> --encryption aes256
administrator@Lansing2 > system --replication_traffic --add --interface bond0
administrator@Lansing2 > network –route --add --network <Lansing1's 10G network> --
gateway <gateway addresses> --interface bond0
administrator@Lansing1 > network --route --add --network <Lansing2's 10G network> --
gateway <gateway addresses> --<IP of 10Gbond of Lansing1>
administrator@Lansing1 > replication --update --name <source-container-name> --role
source --peer <IP of 10G Bond of Lansing2> --replication_traffic <IP of 10G bond of
Lansing1>
Example
Example
Example
Example
Example