Dell PowerVault MD3200i Series Podręcznik wdrażania - Strona 17

Przeglądaj online lub pobierz pdf Podręcznik wdrażania dla Serwer Dell PowerVault MD3200i Series. Dell PowerVault MD3200i Series 41 stron. Storage arrays
Również dla Dell PowerVault MD3200i Series: Aktualizacja instrukcji (32 strony), Instrukcja instalacji stojaka (2 strony), Podręcznik użytkownika (46 strony), Macierz wsparcia (12 strony), Instrukcja instalacji (18 strony), Aktualizacja informacji (1 strony), Macierz wsparcia (11 strony), Macierz wsparcia (17 strony), Podręcznik techniczny (38 strony), Biała księga (22 strony), Podręcznik (16 strony)

Dell PowerVault MD32xxi Configuration Guide for VMware ESX4.1 Server Software

To verify the configuration enter the following command:

esxcfg-vswitch –l

The output will look similar to this:

Switch Name

vSwitch2

PortGroup Name VLAN ID Used Ports

iSCSI3

iSCSI2

iSCSI1

This will show the VMkernel ports that are assigned to the vSwitch. To verify the IP addresses enter the

following command:

esxcfg-vmknic –l

The output will look similar to the graphic below.

You can also verify the IP Addresses via the vCenter GUI. In vCenter, on the ESX Host, navigate to

Configuration -> Networking.

Step3: Assign Network Adapters

The next step in the process is to assign the network adapters (NICs) that will be attached to the iSCSI

network and used for iSCSI traffic. These will be attached to the vSwitch2 that we created earlier. This can

be done two ways, in the vCenter GUI or by CLI.

To list all of the adapters in the system run the following command:

Num Ports

Used Ports

Configured Ports MTU Uplinks

Uplinks

9000

Page 15