Dell PowerVault NX1950 Podręcznik wdrażania - Strona 24

Przeglądaj online lub pobierz pdf Podręcznik wdrażania dla Serwer Dell PowerVault NX1950. Dell PowerVault NX1950 38 stron. For vmware esx server software
Również dla Dell PowerVault NX1950: Podręcznik wdrażania (34 strony), Podręcznik zawierający ważne informacje (26 strony), Pierwsze kroki (49 strony), Instrukcja instalacji i rozwiązywania problemów (48 strony), Instrukcja aktualizacji (18 strony), Podręcznik referencyjny (4 strony), Konfiguracja (2 strony), Korzystanie z (2 strony), Podręcznik konfiguracji (11 strony)

Dell PowerVault NX1950 Podręcznik wdrażania
If you selected Configure RAID, configure the RAID with one of the
c
following options:
Click Go to Advanced Wizard at the top left of the page and
follow the prompts.
Select a RAID level and click Continue.
NOTE:
The RAID configuration summary appears.
Click Continue.
d
The following message appears:
All existing virtual disk(s) on this controller
will be deleted and all data will be lost.
Click OK to continue.
e
The Select an Operating System to Install window appears.
10 To set up a new boot partition, select the appropriate file system and size
for your partition and click Continue.
NOTICE:
If the hard drive has a partition, the Confirm to delete partition window
appears. Click Continue. Dell Systems Build and Update Utility deletes all existing
partitions on the hard drive.
NOTE:
file system.
The Network Adapter(s) configuration window appears.
11 Select one of the following options and click Continue:
Obtain IP address from the DHCP server.
Specify an IP address.
The Enter Configuration Information: Microsoft Windows Server 2003
x64 Edition window appears.
12 Enter your system information in the appropriate fields, and click Continue.
NOTE:
information.
NOTE:
the top-right corner.
24
Deployment Guide
Select RAID1 to ensure adequate redundancy for the boot disk.
For maximum system security, Dell recommends selecting NTFS-NT
If you leave any field blank, Windows Setup prompts you later for this
To provide more configuration information, click the Advanced tab in