Dell Wyse 3000 Instrukcja instalacji i konfiguracji - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja instalacji i konfiguracji dla Serwer Dell Wyse 3000. Dell Wyse 3000 19 stron. Edge series microserver
Również dla Dell Wyse 3000: Skrócona instrukcja obsługi (2 strony)
Drukuj stronę
2.
Installation and Setup
Setup of the Dell WYSE 3000 with an EMS will first require connecting to the Dell Wyse 3000 from a
computer via Ethernet cable and a local DHCP Server. Please note that this guide was written
for a computer running Microsoft Windows.
Refer to the Troubleshooting section of this guide for help with frequently asked questions.
Login to the Dell Wyse 3000 device
1.
Connect a monitor, mouse, and keyboard
to the device, and power it on.
2.
After the device automatically logs in,
hold down the "shift" key and click Start
> Log off. Continue holding the shift key
until the system asks you to choose an
account to login to.
3.
Choose "Adminstrator", and log in. The
default password is "DellCCCvdi".
4.
On the Windows Embedded 7 Desktop,
open the "Networking and Sharing
Center", and then go to Windows
Firewall.
Disable all Firewalls.
ThingWorx EMS Setup Guide
for the Dell WYSE 3000
Page 2-1