Dell XC6320 Pierwsze kroki - Strona 4

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Serwer Dell XC6320. Dell XC6320 50 stron. Web-scale hyperconverged appliance
Również dla Dell XC6320: Podręcznik rozwiązań dla urządzeń hiperkonwergentnych Web-Scale (23 strony)

Push the latch release buttons on the midpoints of the end piece to open the

rail latches (see Figure 1).

Align the end pieces of the rails on the vertical rack flanges to seat the pegs

in the bottom hole of the first U and the top hole of the second U.

NOTE: The rails can be used in both square-hole and round-hole

racks (see Figure 1).

Figure 1. Pushing the Latch Release Buttons

NOTE: To remove the rails, push the latch release button on the

midpoints of the end piece and unseat each rail.

Engage the end of the rails and release the latch release button to have the

latches locked in place.

On each vertical rack flange on the back, put two screw bases into the two

square holes right above the rail (see Figure 2).

Install the chassis stabilizer shipping brackets (optional) on the back rack

flanges.

Install and tighten the screws.

NOTE: To transport systems already installed in the rack, ensure

that the two chassis stabilizer shipping brackets (optional) are in

place.

Getting Started With Your System