Dell 2005FPW - UltraSharp - 20.1" LCD Monitor Instrukcja serwisowa - Strona 10
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla Monitor Dell 2005FPW - UltraSharp - 20.1" LCD Monitor. Dell 2005FPW - UltraSharp - 20.1" LCD Monitor 33 stron. Service manual
Również dla Dell 2005FPW - UltraSharp - 20.1" LCD Monitor: Konfiguracja (2 strony), Arkusz danych środowiskowych (3 strony), Specyfikacje (2 strony)
Drukuj stronę
1. Video Controller Part & Display Data Transmitter Part.
This part amplifies the level of video signal for the digital conversion and converts from the analog video signal to the
digital video signal using a pixel clock.
The pixel clock for each mode is generated by the PLL.
The range of the pixel clock is from 25MHz to 147MHz.
This part consists of the Scaler, Flash-ROM IC which stores program data, Reset IC.
The Scaler gets the video signal converted analog to digital, interpolates input to 1680 x1050 resolution signal and
outputs 8-bit R, G, B signal to transmitter.
Especially pre-amp / ADC / Video controller/ Transmitter are merged to one chip "Gm1501" by Genesis.
This part transmit digital signal from the Scaler to the receiver of module.s
2. Power Part
This part consists of the two 3.3V and one 2.5V and one 1.8Vregulators to convert power which is provided
12V in Power Board V is provided for LCD Panel.(Only LPL)
5V in Power Board V is provided for LCD Panel.(Only AUO)
12V in Power Board V is provided for Inverter Part.
Also, 5V is converted 3.3V and 2.5V and 1.8V by regulator. Converted power is provided for IC in the main board.
DESCRIPTION OF BLOCK DIAGRAM
- 10 -