Dell C2422HE Podręcznik - Strona 8

Przeglądaj online lub pobierz pdf Podręcznik dla Monitor Dell C2422HE. Dell C2422HE 21 stron.

4.2 Assembly Procedures:

Place a bracket chassis base on a protective

cushion, then stick 3pcs Silicon sheets on the

position as the picture below shown.

Turn over a power board and put the power board

into the bracket chassis.

Take a interface board, connect 1pcs EDP cable and

1pcs camera cable to the connectors of the interface

board, then connect the cable of the power board to

the connector of the interface board. Turn over the

interface board and locate it into the bracket chassis

module. Use a Philips-head screwdriver to tighten

7pcs screws for locking the interface board and

power board with the bracket chassis module.

(No.1 screw size=M4x8, Torque=7.5

No.2~7 screw size=M4x8, Torque=7.5

4. Disassembly and Assembly Procedures

kgfxcm;

±0.5

kgfxcm)

±0.5

Take a black mylar, tear off 2pcs gum on the back of

the mylar, then paste the mylar on the specific

position of the bracket.

Panel module preparation: Take out 1pcs panel

module with front bezel from carton, remove the

protective film by tearing off all the tapes of the panel

module, then power on the panel module to examine

the panel surface according to inspection criteria

carefully.

Take 1pcs Dell nameplate, then use a locating fixture

to fix the nameplate to the front bezel of the module,

and then move the whole unit into a laminating

fixture, use the laminating fixture to press the

nameplate with the front bezel of the panel module

firmly attachment.