EarthLinked HCM-1860C Instrukcja instalacji i konserwacji - Strona 10

Przeglądaj online lub pobierz pdf Instrukcja instalacji i konserwacji dla Klimatyzator EarthLinked HCM-1860C. EarthLinked HCM-1860C 13 stron. Hybrid cooling module

Drukuj stronę

Installation – Electrical & Start-Up

BEFORE REMOVING ANY ACCESS PANELS AND INITIATING ANY PHASE

OF THIS INSTALLATION, MAKE SURE THAT POWER IS TURNED "OFF" TO

ALL EARTHLINKED

FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS

INJURY OR DEATH.

WEAT ADEQUATE PROTECTIVE CLOTHING AND PRACTICE ALL

APPLICABLE SAFETY PRECAUTIONS WHILE INSTALLING THIS

EQUIPMENT. FAILURE TO DO SO MAY RESULT IN EQUIPMENT AND/OR

PROPERTY DAMAGE, PERSONAL INJURY OR DEATH.

1. After turning "OFF" power to all EarthLinked

the appropriate breakers remove the Hybrid Cooling Module control box access

panel.

2. Connect the appropriate sized line voltage wires and ground wire to the Hybrid Cooling

Module, as shown in Figure 5. Seal-tight line voltage entrance is located on the back

side of the HCM, see Figure 6.

The Hybrid Cooling Module cabinet must have an unbroken ground.

The ground must be installed in accordance with applicable electrical

codes. Failure to follow this warning can result in injury, fire or death.

HCM-IMM (10/16)

WARNING!

AND FIELD SUPPLIED SYSTEM COMPONENTS.

WARNING!

and field supplied system components at

WARNING!