Dell PowerVault 201S Instrukcja wymiany - Strona 3

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Przechowywanie Dell PowerVault 201S. Dell PowerVault 201S 14 stron. Dell powervault 20xs storage systems enclosure services expander module installation
Również dla Dell PowerVault 201S: Instrukcja instalacji stojaka (26 strony), Podręcznik (9 strony), Aktualizacja (4 strony), Konfiguracja (2 strony), Instrukcja instalacji (48 strony)

Drukuj stronę

If the storage system is in a stand-alone configuration, tap the bar to the

left. The lock bar springs out. Swing the lock bar to the right of the drive

bays.

drive bays

Figure 1. Keylock and Swing-out Lock Bar (Silver)

NOTICE: To avoid damage, do not pull the tab handle of the

black, removable lock bar out too far. Figure 2 shows the lock bar

at an exaggerated angle (after it is completely out of its hole).

For a storage system with the black, removable lock bar:

a. Grasp the tab handle on the lock bar and gently pull it toward you,

about 1/2-inch away from the unlocked keylock.

b. Slide the left end of the lock bar to the right to remove it from its hole

(see Figure 2).

lock bar

tab handle

Figure 2. Keylock and Removable Lock Bar (Black)

3. Remove the hard-disk drives.

NOTICE: Handle the hard-disk drives with care. The carriers pro-

vide some protection, but the hard-disk drives can be damaged

by rough handling. When removing the hard-disk drives from the

storage system, place them on a padded surface. Never drop the

hard-disk drives.

Release the hard-disk drive carrier by pressing down on the hard-disk drive

carrier lock (see Figure 3) and swing the carrier handle down (see Figure 4).

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions

enclosure status indicators

keylock

lock bar

key lock