Dell PowerVault 211S Instrukcja wymiany - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Przechowywanie Dell PowerVault 211S. Dell PowerVault 211S 14 stron. Dell powervault 20xs storage systems enclosure services expander module installation
Również dla Dell PowerVault 211S: Instrukcja instalacji stojaka (26 strony), Podręcznik (9 strony), Aktualizacja (4 strony), Konfiguracja (2 strony), Instrukcja instalacji (48 strony)

Drukuj stronę

1. Using a Phillips-head screwdriver, loosen the captive screw at the top of

the enclosure services module.

2. Grasp the handle on the enclosure services module and pull it from the

module bay (see Figure 7).

Figure 7. Enclosure Services Module Removal

3. Repeat steps 1 and 2 to remove the remaining enclosure services module.

Remove the Component Mounting Bracket

To remove the component mounting bracket, perform the following steps:

1. Using a Phillips-head screwdriver, remove the two screws that secure the

component mounting bracket to the chassis (see Figure 8).

2. Lift the component mounting bracket slightly and slide it out of the chassis.

Dell PowerVault 2xxS Storage Systems SCSI Backplane Board Replacement Instructions

captive screw