Dell PowerVault 50F Instrukcja połączenia - Strona 22
Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Przechowywanie Dell PowerVault 50F. Dell PowerVault 50F 38 stron. Dell powervault 56f switches rack installation guide
Również dla Dell PowerVault 50F: Instrukcja instalacji (8 strony), Podręcznik użytkownika (42 strony), Instrukcja instalacji stojaka (28 strony)
Drukuj stronę
3-4
Dell PowerVault 5xF Switches Zoning Guide
7 .
Enable the new configuration.
8.
Test the new configuration.
9.
Save the new configuration again.
( +
1.
Create an alias for the device by typing
(or port number).
2.
Add the zone that contains the device by typing
.
3.
Save the configuration by typing
4.
Enable the configuration by typing
, +
%
1.
Remove the device by typing
2.
Save the configuration by typing
3.
Enable the configuration by typing
,
+
1.
Remove the device by typing
2.
Create an alias for the device that you want to use as a replacement by typing
3.
Add the zone that contains the device by typing
.
4.
Save the configuration by typing
5.
Enable the configuration by typing
& )%'
When two fabrics with zone configuration information are joined, the zoning software
attempts to merge the two zone configurations. Dell does not support merging fab-
rics. However, Dell does support splitting fabrics. See the following subsection for
more information.
* %'
A fabric will split into two separate fabrics if an ISL fails. Each new fabric retains the
same zone configuration.
.
.
.
.
(or port number).
.
.
.
.