Dell PowerVault 56F Instrukcja połączenia - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja połączenia dla Przechowywanie Dell PowerVault 56F. Dell PowerVault 56F 38 stron. Dell powervault 56f switches rack installation guide
Również dla Dell PowerVault 56F: Podręcznik użytkownika (6 strony), Instrukcja instalacji (8 strony), Podręcznik użytkownika (42 strony), Instrukcja instalacji stojaka (28 strony)

With SNS zoning, a device can still be accessed if a requester knows (by some other

means) the WWN of the target. For this reason, the PowerVault 51F switch also

supports hardware-enforced zoning when physical fabric port numbers are used to

specify zones.

& $

Two databases are used by zoning—one for the zone configuration data and another

for the N_Port login data.

Zone configuration data is shown as the defined configuration by the cfgShow com-

mand and is stored in flash by the cfgSave command. This data is a replicated

database, and all fabric switches have a complete copy. When you save a configura-

tion, the switch where you entered the command forwards the change to all fabric

switches using a vendor-unique interswitch protocol.

N_Port login data is stored locally on each switch and is used to translate worldwide

names into physical fabric port numbers when worldwide names are used in zone

definitions. The zone checking procedure runs entirely on the local switch when a

match can be made by physical fabric port number alone. However, when a physical

fabric port number is not sufficient, the local switch must query the remote switch to

get login data. This data is then cached on the local switch until a state change notifi-

cation renders the data unusable.

3-6

Dell PowerVault 5xF Switches Zoning Guide