Dell PowerVault 725N Aktualizacja oprogramowania sprzętowego - Strona 3
Przeglądaj online lub pobierz pdf Aktualizacja oprogramowania sprzętowego dla Przechowywanie Dell PowerVault 725N. Dell PowerVault 725N 12 stron. Nas systems with software raid
Również dla Dell PowerVault 725N: Aktualizacja instrukcji (10 strony), Aktualizacja informacji (28 strony)
Drukuj stronę
Depending on your environment, you can use either of the following methods to update
your firmware on the 39160 SCSI card.
•
Use a dedicated system running the Microsoft
(recommended).
•
Use a system running Windows 2000 on the same network.
Disabling Console Redirection
Before you update your 39160 firmware, you must disable console redirection in the BIOS.
To disable console redirection, perform the following steps:
Shut down your NAS system.
1
Attach a keyboard, mouse, and monitor to your NAS system.
2
Turn on your NAS system.
3
On the keyboard connected to the NAS system, press <F2> immediately after the
4
following message appears:
Press <F2> to enter the Function Select menu.
From the Function Select menu, select 1.
5
In the BIOS Setup Utility, press the right-arrow key until Advanced is selected.
6
Press the down-arrow key until Remote Access Configuration is selected and press
7
Enter.
Ensure that Remote Access is selected and press Enter.
8
Select Disabled and press Enter.
9
Press <F10> to exit the BIOS Setup Utility and select OK to save the changes.
10
To enable console redirection after the 39160 firmware is updated, perform step 1 through
step 10, except select Serial (ANSI) instead of Disabled in step 9.
Using a Dedicated System Running Windows 2000
Requirements
•
Crossover cable included with your NAS system
•
Client system running Windows 2000 (Professional or Server Family)
•
Resource CD included with your NAS system
®
®
Windows
2000 operating system
Upgr ading Yo ur 39160 SC SI Card Fir mware
1-1