Dell PowerVault MD3060e Series Instrukcja obsługi - Strona 38

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przechowywanie Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 40 stron. Storage enclosure
Również dla Dell PowerVault MD3060e Series: Instrukcja obsługi sprzętu i oprogramowania (25 strony), Instrukcja instalacji (11 strony), Podręcznik dla początkujących (10 strony), Aktualizacja informacji (8 strony), Instrukcja instalacji stojaka (2 strony), Konfiguracja (2 strony), Podręcznik wdrażania (24 strony), Podręcznik administratora (35 strony), Podręcznik dla początkujących (10 strony), Podręcznik wdrażania (24 strony), Podręcznik administratora (48 strony), Konfiguracja (2 strony)

Drukuj stronę

Power

NOTE: This system is also designed to be

connected to IT power systems with a

phase to phase voltage not exceeding

230 V.

Environmental

NOTE: For additional information about environmental measurements for specific system

configurations, see dell.com/environmental_datasheets.

Temperature

Operating

Storage

Relative humidity

Operating

Storage

Maximum vibration

Operating

Storage

Maximum shock

Operating

Storage

Continuous operation: 10 °C to 35 °C (50 °F to 95 °F) at

20% to 80% relative humidity (RH), with 26 °C

maximum dew point. De-rate maximum allowable dry

bulb temperature at 1 °C/300 m (1 °F per 550 ft) above

900 m (2952.75 ft).

NOTE: For information on supported expanded

operating temperature range and configurations,

see the Owner's Manual at dell.com/support/

manuals.

–40 °C to 65 °C (–40 °F to 149 °F) with a maximum

temperature gradation of 20 °C per hour

20% to 80% (noncondensing) with maximum humidity

gradation of 10% per hour

5% to 95% at a maximum wet bulb temperature of 38

°C (100.4 °F)

0.26 G

at 5 Hz to 350 Hz in operational orientation

rms

1.88 G

at 10 Hz to 500 Hz for 15 minutes (all six sides

rms

tested)

One shock pulse in the positive z axis of the system at

31 G for 2.6 ms in the operational orientation

Six consecutively executed shock pulses in the positive

and negative x, y, and z axes (one pulse on each side of

the system) at 71 G for up to 2 ms

Six consecutively executed shock pulses in the positive

and negative x, y, and z axes (one pulse on each side of

the system) of 22 G faired square wave pulse with

velocity change at 200 inches/second (508

centimeters/second)