Dell PowerVault MD3060e Series Konfiguracja - Strona 2

Przeglądaj online lub pobierz pdf Konfiguracja dla Przechowywanie Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 2 stron. Storage enclosure
Również dla Dell PowerVault MD3060e Series: Instrukcja obsługi sprzętu i oprogramowania (25 strony), Instrukcja instalacji (11 strony), Podręcznik dla początkujących (10 strony), Aktualizacja informacji (8 strony), Instrukcja instalacji stojaka (2 strony), Konfiguracja (2 strony), Podręcznik wdrażania (24 strony), Podręcznik administratora (35 strony), Podręcznik dla początkujących (10 strony), Podręcznik wdrażania (24 strony), Instrukcja obsługi (40 strony), Podręcznik administratora (48 strony)

Drukuj stronę
Dell PowerVault MD3060e Series Konfiguracja
Setting Up Your Dell PowerVault MD3060e Storage Enclosure (continued...)
Cabling Your Storage Enclosure to a Storage Array
Cabling Your MD3060e Storage Enclosure
To add capacity to your RAID storage array, you can daisy chain up to two 4U enclosures
with SAS-based EMMs.
This configuration offers a maximum of 180 physical disks in your storage array with
Premium Feature activation.
To connect the MD3060e-based storage enclosure to your MD Series Dense RAID
storage array:
1.
Connect a supported SAS cable to the SAS OUT port on the MD Series Dense storage
array.
2.
Connect the other end of the SAS cable to SAS port 1 on the MD3060e EMM as
shown in the following figure.
3.
To add a second MD3060e storage enclosure, daisy chain it to the first expansion
enclosure as shown in the figure.
CAUTION:
Do not connect the SAS cable to SAS port 2 on the EMM.
CAUTION:
Like the RAID storage arrays, physical-disk slots 0, 3, 6, and 9 must be
populated first.
NOTE: A maximum of two expansion enclosures are supported for a total of three
enclosures.
Cabling Your Storage Enclosure to a Server
Single Path Configuration
1.
Connect a supported SAS cable to the first SAS port on your server's HBA.
2.
Connect the other end of the SAS cable to SAS port 1 on EMM 0 of the MD3060e as
shown in the following figure.
NOTE: For configurations with additional servers or storage enclosures, see the MD3060e
Deployment Guide.
MD Series Dense Storage Enclosure
A
B
MD3060e EMM
MD3060e EMM
High Availablity Configuration
1.
Connect the first supported SAS cable to the first SAS port on your server's HBA.
2.
Connect the other end of the SAS cable to SAS port 1 on EMM 0 of the MD3060e as
shown in the following figure.
3.
Connect a second supported SAS cable to the second SAS port on your server's HBA.
4.
Connect the other end of the SAS cable to SAS port 1 on EMM 1 of the MD 3060e as
shown in the following figure.
5.
Install the appropriate multipath software for your operating system on the attached
server. For more information, see your operating system documentation.
NOTE: For configurations with additional servers or storage enclosures, see the MD3060e
Deployment Guide.
Copyright © 2014 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell™ and the
Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of
their respective companies.
Printed in the U.S.A.
2014 - 04