Dell PowerVault MD3260 Series Podręcznik wdrażania - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik wdrażania dla Przechowywanie Dell PowerVault MD3260 Series. Dell PowerVault MD3260 Series 24 stron. Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
Również dla Dell PowerVault MD3260 Series: Instrukcja obsługi sprzętu i oprogramowania (25 strony), Instrukcja instalacji (11 strony), Podręcznik dla początkujących (10 strony), Aktualizacja informacji (8 strony), Instrukcja instalacji stojaka (2 strony), Konfiguracja (2 strony), Podręcznik wdrażania (26 strony), Podręcznik konfiguracji (17 strony), Podręcznik dla początkujących (9 strony)

Drukuj stronę
Dell PowerVault MD3260 Series Podręcznik wdrażania
For more information, see the Support Matrix at support.dell.com/manuals.
2.
Install the software and driver package included on the PowerVault MD Series resource media.
For information about installing the software, see
3.
Using MD Storage Manager, update the RAID controller module and NVSRAM firmware to the latest versions
available on support.dell.com.
4.
Click Tools → Upgrade RAID Controller Module Firmware from the Enterprise Management Window (EMW).
5.
Stop all I/O to the storage array and turn off affected host systems attached to the storage array.
6.
Turn off the storage array.
7.
Turn off any expansion enclosure(s) in the affected system.
8.
Cable the expansion enclosure(s) to the storage array.
9.
Turn on the expansion enclosure(s) and wait for the enclosure status LED to turn blue.
10. Turn on the storage array and wait for the status LED to indicate that the unit is ready:
–
When power is on, the power on indicator lights solid green.
–
If the Service action required indicator lights amber, there is an error that can be viewed using the
PowerVault Modular Disk Storage Manager.
11. After the storage array is online and ready, turn on any attached host systems.
12. Using PowerVault MD Storage Manager, update all attached expansion enclosure firmware if it is out of date.
13. From the EMW, select the enclosure that you want to update and launch the Array Management Window (AMW).
14. Select Upgrade → EMM Firmware.
15. Click Select All to update all the attached expansion enclosures simultaneously.
16. Click Start.
14
Installing MD Storage
Manager.