Quick Start Installation
CAUTION: Before performing any of the procedures in this section, read and follow the
safety instruction in your Product Information Guide.
Dell-Installed PowerVault RD1000 Internal Drive
Dell performs the installation of a RD1000 Internal drive that is shipped as part of a system. If you are
®
running Windows
you will need to install the software included on the RD1000 User's Guide and
Utilities DVD, which includes essential Windows software for use with the RD1000 unit. In this case,
installation instructions are provided below in the "Installing Unit Software for Windows" section. If
you are using the Linux operating system see the appendix "Using the Linux Operating System".
Store the software DVD/diskette that came with your system in a safe place in case you ever need to
reinstall the software. If the software is misplaced it can be downloaded from www.Dell.com/support.
User-Installed PowerVault RD1000 Internal Drive
(Customer Kit)
This section describes how a user can install the PowerVault RD1000 Internal drive, in case it did not
come pre-installed by Dell.
Before You Begin
The RD1000 unit ships ready to install in a standard 3.5-inch or 5.25-inch half-high drive bay
depending on the configuration you order.
Depending on your computer you may need a standard (flat-blade) or Philips screwdriver to remove
the computer cover and install the drive in your computer.
Important Information on Electro-Static Damage
To protect your computer and drive from electro-static damage (ESD), follow these guidelines:
Before you open your computer or remove the RD1000 unit from its antistatic bag, ground
yourself by touching the metal chassis of your computer or some other grounded object. For
optimal protection, use an electrostatic grounding strap.
NOTE: Your computer must be plugged into a grounded electrical outlet to be properly
grounded.
Do not touch any printed circuit boards or electronic chips on your RD1000 device or in your
computer.
Turn your computer and any peripheral devices off before installing the RD1000 unit.
Drukuj stronę