Dell PowerVault TL2000 Instrukcje dotyczące załączników - Strona 5

Przeglądaj online lub pobierz pdf Instrukcje dotyczące załączników dla Przechowywanie Dell PowerVault TL2000. Dell PowerVault TL2000 17 stron. Tape library
Również dla Dell PowerVault TL2000: Informacje o wersji (3 strony), Pierwsze kroki (38 strony), Faq (26 strony), Skrócona instrukcja obsługi (7 strony), Instrukcja oprogramowania (16 strony), Podręcznik konfiguracji (22 strony), Podręcznik zawierający ważne informacje (10 strony), Dodatek do instrukcji obsługi (2 strony), Podręcznik dla początkujących (3 strony), Broszura (4 strony), Podręcznik użytkownika (20 strony)

iSCSI for TL-Series Tape Libraries

SECTION 3

iSCSI SAN SOLUTIONS

To complement the Dell PowerVault MD3000i and Dell EqualLogic & EMC line of iSCSI inter-

face disk storage systems, Dell has introduced an iSCSI-to-SAS Bridge Card for the Dell

PowerVault TL2000 & TL4000 tape libraries. This card, when inserted into a TL-Series tape

library, acts as an iSCSI target and provides SAS connectivity for LTO4, LTO4HH and

LTO3HH tape drives.

Best Practices: Oversubscription of the network switches can lead to many of the

"performance" concerns often voiced about iSCSI networks. Using a dedicated, switched 1GbE

switch such as the Dell PowerConnect 62XX or 54XX for iSCSI traffic is recommended. Should

this prove unfeasible, deploying a PowerConnect 54XX iSCSI-optimized switch for combined

traffic is recommended. It will detect iSCSI traffic and raise its Level of Service – in essence,

providing more bandwidth to the iSCSI traffic.

Best Practices: In most applications, exposing an iSCSI SAN to the internet can result in a

security vulnerability and should be avoided if possible. While iSCSI does have some security

features integrated into its specification (e.g., CHAP), it is typically a user-selectable feature

and is not as robust as some other systems. Additionally, unless IPsec is implemented and

enabled, data in-flight is transmitted "in the clear." Use of private, dedicated networks is

strongly encouraged.

SECTION 4

STEP-BY-STEP SETUP

Servers connected to the iSCSI SAN will require an iSCSI initiator. Since most servers are

Windows-based, Microsoft's iSCSI Initiator is a cost effective solution, available as a free

download:

http://www.microsoft.com/downloads/details.aspx?FamilyID=12cb3c1a-15d6-4585-

b385-befd1319f825&DisplayLang=en. Once installed, the set-up and use is straight-forward.

The important consideration on this screen is the use of CHAP (Challenge Handshake Authen-

tication Protocol). This is the main security apparatus in iSCSI. If your iSCSI SAN is visible to

the external internet, it is highly recommended to enable this feature. Even with the availability

of CHAP, it is still recommended to keep the iSCSI SAN private and not visible to the outside

world.

SEPTEMBER 2008