Dell PS4110 Instrukcja obsługi sprzętu - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi sprzętu dla Przechowywanie Dell PS4110. Dell PS4110 48 stron. Storage arrays
Również dla Dell PS4110: Podręcznik użytkownika (20 strony), Instrukcja obsługi sprzętu (50 strony), Przegląd (7 strony), Instalacja (2 strony)

2 Maintaining Drives

You can replace a failed drive while the array remains running.

Depending on your configuration, your array supports up to 24 2.5-inch SAS drives or up to 12 3.5-inch SAS

drives in internal drive bays.

Drives are connected to a backplane through drive carriers and are hot-swappable.

Drives are supplied in a carrier that is keyed to fit into specific array models, and cannot be installed in other

Dell arrays, or arrays not from Dell Inc.

A drive failure is indicated by:

•

LEDs on the drive. See

•

A message on the console, in the event log, or in the Group Manager Alarms panel.

•

Indications in the Group Manager Member Disks window or the CLI

output.

Behind the bezel, arrays have a label showing the drive numbering for that specific array model:

•

In arrays with 2.5-inch drives (installed vertically in a row), the drives are numbered 0-23, left to right.

•

In arrays with 3.5-inch drives (installed horizontally), the drives are numbered from left to right and top to

bottom, starting with 0 on the upper left side.

Interpreting Drive LEDs on page

Table 3

Table 3: 3.5-inch Drive Numbering

3.5-inch Drive Numbering

member select show disks

shows the drive order for the 3.5-inch drives.

command