Dell TUMAE Instrukcja obsługi - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przechowywanie Dell TUMAE. Dell TUMAE 47 stron. Direct-attach storage for poweredge servers

Figure 16. Install the lower CMA (upper CMA not shown)

Install the hard disk drives

The hard disk drives are shipped separately from the enclosure, install them in the enclosure after the enclosure is secure in the

rack.

CAUTION:

The PowerVault MD2460 enclosures do not support SSDs, NVMe, SATA, or vSAS drives. See the

PowerVault MD24 Series Support Matrix for the complete list of supported drives.

If you insert a SATA drive into the enclosure and then replace it with a SAS drive, the enclosure will not recognize the SAS drive.

See

Recovering from unsupported drive installation

The PowerVault MD2460 enclosures use chassis-specific drive carriers. The other drive carriers are not compatible with this

enclosure.

Steps

1. Insert the drive into the drive carrier with the connector end of the drive at the back.

2. Using a Phillips #1 screwdriver, install four screws to secure the drive to the drive carrier.

for information about how to recover from this state.

Installing the enclosure

Dell