3 Day Blinds Faux Wood 1 Pierwsze kroki - Strona 5

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Rolety okienne 3 Day Blinds Faux Wood 1. 3 Day Blinds Faux Wood 1 6 stron.

Drukuj stronę

BLIND OPERATION

To lower the blind, pull the lift cords down and toward the

center of the blind and allow the cords to slide slowly through

your hand.

To tilt the slats, twist the tilt wand.

Do not attempt to raise or lower the blind unless the slats are

in a completely open (horizontal) position.

To raise the blind, pull the lift cords down.

To engage the lock, pull the lift cords down and toward the

outside of the blind.

BLIND REMOVAL

| 1" Faux Wood Blinds

• Using a flathead

screwdriver, open the

latches of the end

brackets.

• Holding on to both ends

of the headrail, gently

pull the blind forward

and out of the brackets,

making sure to unhook

the headrail from the

center support bracket(s),

if applicable.

OPTIONAL HARDWARE

INSTALLATION

SPACERS

Available for use on windows with a

projected molding. They are

allow the blind to be mounted flush with

the outside edge of any standard window

molding.

Spacers are available by contacting our

Client Care Team at 800-800-2239.

EXTENSION BRACKETS

Extension brackets are available in two sizes. One size is

available to project the blind up to 2", the other up to 3" from

the mounting surface. Extension brackets are ideal if your

blind must clear an obstruction such as a sliding glass door

handle or window crank. Extension brackets require a flat

vertical mounting surface of at least 1

• Attach each mounting bracket to an extension bracket using

the nuts, bolts and washers provided.

• Mount the extension bracket to the wall per the instructions

for an "Outside Mount" on page 3 using a level and making

certain that all mounting brackets are level and project the

same distance from the mounting surface.

• Install the blind per the directions for "Blind Installation" on

page 6.

Spacers

(one spacer per

" thick and

bracket)