Dell Force 10 Podręcznik - Strona 26

Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Dell Force 10. Dell Force 10 29 stron. Implementing fcoe in the linux operating system

Implementing FCoE in the Linux Operating System

4. After package installation is complete, you can then change back to the home directory and

unmount your installation media by running the cd ~ and umount /media command, as in

Figure 27.

Configuring the FCoE client VLAN

To configure the FCoE client VLAN, perform the following steps:

1. Change directory to /etc/fcoe , and copy the /etc/fcoe/cfg-ethx file to

/e4tc/fcoe/<interface> , where <interface> is the name of the specific network

interface over which FCoE traffic flows. In this example, we will use the interface name p3p1 .

See Figure 28 for details.

Figure 28.

2. Then edit the /etc/fcoe/cfg-p3p1 file and set DCB_REQUIRED variable to "no" , as in

Figure 29.

3. Next, check the /etc/fcoe/config file, and verify that the SUPPORTED_DRIVERS variable

is set to "fcoe bnx2fc" , as in Figure 30.

Figure 27.

Unmounting the installation media.

Creating the FCoE Adapter Configuration file.

Setting the DCB_REQUIRED variable to "no".