Earthlite Ellora Vista Tilt Podręcznik użytkownika - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Wyposażenie wnętrz Earthlite Ellora Vista Tilt. Earthlite Ellora Vista Tilt 20 stron. Electric lift table

Drukuj stronę

1. Troubleshooting

UNPACKING YOUR ELLORA VISTA™ STATIONARY TABLE

The following steps will guide you through carefully removing your Ellora™ Vista Stationary table from

the shipping crate. We recommend wearing work gloves during these steps.

Remove the rectangular cardboard lid from the top of the table. Once you have removed the cardboard

lid and surrounding cardboard walls from shipping crate, you will find the wheels and foot glide

levelers are seated tightly within wood brackets which have been screwed into the plywood base of

the shipping crate.

RECOMMENDED TOOLS NEEDED

Work

Gloves

Step 1

With a Phillips #1 screwdriver (or a powered screwdriver),

carefully unscrew and remove the two (2) Front facing

wood brackets from the plywood base.

(Diagram A)

We recommend removing the two (2) front facing wood

brackets (Diagram A) that enclose the foot glide levelers.

Do not remove the rear brackets which enclose the rear

wheels (Diagram B). These brackets are twice as thick as

the front brackets, and will be more difficult to remove.

Step 2

Once the front brackets are removed, Carefully pull the

Ellora™ Vista straight away from the rear brackets and

slide the table onto the floor. We recommend at least two

(2) people conduct this step together.

(Diagram C)

It is possible to lift the table directly out of the shipping

crate without removing any of the wood brackets, but this

is dangerous and not recommended because the weight of

the table is at least 200 lbs.

Step 3

Once the table is pulled safely away from the shipping

crate, make sure the path from the table to your preferred

destination is clear of any obstacles or tripping hazards.

(Diagram D)

TABLE REMOVAL FROM SHIPPING CRATE

If you did not have your table shipped with 'white glove' service, you may be

required to remove your table from its shipping crate. We highly recommend that

at least two people conduct the following steps to uncrate the table.

Phillips #1 Screw

Driver