Dell Force10 S4810 Podręcznik wdrażania - Strona 30
Przeglądaj online lub pobierz pdf Podręcznik wdrażania dla Przełącznik Dell Force10 S4810. Dell Force10 S4810 36 stron. Dell force10 s4810 switch
Również dla Dell Force10 S4810: Skrócona instrukcja obsługi (27 strony), Podręcznik konfiguracji (17 strony), Podręcznik konfiguracji (17 strony)
Drukuj stronę
flow-map
Specify if flows installed by the controller should be interpreted by the switch for placement in L2 or L3 tables.
Z-Series, S4810
Syntax
flow-map {l2|l3} enable
Parameter
l2
l3
Defaults
None (not enabled)
Command Modes
OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
Usage
L2 flow-mapping is not supported on OpenFlow instances with an interface-type of "port."
Information
Related
openflow of-instance
Commands
interface-type
Specify the type of interface (port, VLAN, or any) for the OpenFlow instance.
Z-Series, S4810
Syntax
interface-type {any|port|vlan}
Defaults
port
Parameter
any
port
vlan
Command Modes
OPENFLOW INSTANCE
Command History
Version 9.1(0.0)
30
Enter l2 to interpret Layer 2 flows.
Enter l3 to interpret Layer 3 flows.
Introduced on Z9000 and S4810.
Create or modify an OpenFlow instance.
any to enable configuration of physical interfaces,
Enter the keyword
LAGs, and VLANs on the selected OF instance.
Default. Enter the keyword
port to enable configuration of LAGs or
physical interfaces on the selected OF instance.
vlan to enable configuration of VLANs on the
Enter the keyword
selected OF instance.
NOTE: You must associate the OF instance with the VLAN when
the VLAN is created.
Introduced on Z9000 and S4810.