Dell Force10 S60 Series Skrócona instrukcja obsługi - Strona 19
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Przełącznik Dell Force10 S60 Series. Dell Force10 S60 Series 29 stron.
Również dla Dell Force10 S60 Series: Podręcznik (45 strony)
Drukuj stronę
Installing the Software
Navigating CLI Modes
The FTOS prompt changes to indicate the CLI mode. You must move linearly
through the command modes, with the exception of the end command which
takes you directly to EXEC Privilege mode; the exit command moves you up
one command mode level.
Console Access
NOTE: You must have a password configured on a virtual terminal line before you
can Telnet into the system. Therefore, you must use a console connection when
connecting to the system for the first time.
The S55/S60 has 2 management ports available for system access: a serial
console port and a USB-B port. The USB-B ports acts exactly as the console
port.
By default, the S55/S60 sends system messages to the serial console port.
However, only one console connection can be active at a time. When both the
serial console port and the USB-B port are connected, the system defaults to the
USB-B port. The console connection is considered inactive if the USB-B port is
also connected.
You can switch between console connections by physically connecting or
disconnecting the cables. A system message is displayed on the serial console
prior to switching to the USB-B console. When the USB-B cable is detached,
the system returns to the serial console default.
Installing the Software
2
17