Dell N1108T-ON Podręcznik dla początkujących - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Przełącznik Dell N1108T-ON. Dell N1108T-ON 27 stron.

Connecting an N1100-ON Series Switch to a

Terminal

After completing all external connections, configure the switch by connecting

it to a terminal.

NOTE:

Read the Release Notes for this product before proceeding. You can

download the Release Notes from the Dell Support website at dell.com/support.

NOTE:

Dell recommends that you obtain the most recent version of the user

documentation from the Dell Support website at dell.com/support.

To monitor and configure the switch via the USB console, use the console

port on the front panel of the switch to connect it to a computer running

VT100 terminal emulation software using the supplied USB cable. It may be

necessary to download and install a driver on first use of the USB cable.

The following equipment is required to use the console port:

•

VT100-compatible computer with a USB port running VT100 terminal

emulation software, such as HyperTerminal

•

The supplied USB cable with a type B USB connector for the console port

and USB connector for the host PC.

Perform the following tasks to connect a terminal to the switch console port:

1 Connect the USB type B connector on the supplied switch and connect

the other end to a computer running VT100 terminal emulation software.

2 Configure the terminal emulation software as follows:

Select the appropriate serial port (for example, COM 1) to connect to

the console.

Set the data rate to 115,200 baud.

Set the data format to 8 data bits, 1 stop bit, and no parity.

Set the flow control to none.

Set the terminal emulation mode to VT100.

Select Terminal keys for Function, Arrow, and Ctrl keys. Make sure

that the setting is for Terminal keys (not Microsoft Windows keys).

3 Connect the USB type B connector on the cable directly to the switch

console port. The Dell Networking console port is located on the right side

of the front panel and is labeled with a |O|O| symbol.

Getting Started Guide

and a USB driver.