Dell PowerConnect 6248P Specyfikacje - Strona 2
Przeglądaj online lub pobierz pdf Specyfikacje dla Przełącznik Dell PowerConnect 6248P. Dell PowerConnect 6248P 2 stron. Powerconnect 6200 series
Również dla Dell PowerConnect 6248P: Uwaga dotycząca wydania (34 strony)
Drukuj stronę
Product
Port types
Port configuration
Performance
Availability
Layer 3 routing protocols
VLAN
Quality of service
Layer 2 multicast
Security
Other switching features
Management
Chassis
Optional peripheral products
© 2011 Dell Inc. All rights reserved. Dell, the DELL logo, the DELL badge and PowerConnect are trademarks of Dell Inc. Other trademarks and trade names may be
used in this document to refer to either the entities claiming the marks and names or their products. Dell disclaims proprietary interest in the marks and names of
others. This document is for informational purposes only. Dell reserves the right to make changes without further notice to the products herein. The content provided
is as-is and without expressed or implied warranties of any kind.
*Select PowerConnect products carry a Lifetime Limited Warranty with Basic Hardware Service (repair or replacement) for life. Repair or replacement does not include
troubleshooting, configuration, or other advanced service provided by Dell ProSupport. For more details see dell.com/warranty.
See all networking products at Dell.com/PowerConnect
SS718_Dell_PowerConnect_6200_Series_092010_022211
Dell
™
PowerConnect
™
6224 & 6224P
24 10/100/1000BASE-T auto-sensing
Gigabit Ethernet switching ports; 4 SFP combo
ports for fiber media support; 10 Gigabit Ether-
net uplink modules (optional).
6224P: Up to 15.4 watts per port (with optional
external power supply) on all 24 ports
Resilient stacking up to 12 systems (with optional module); Auto-negotiation for speed, duplex mode and flow control; Auto MDI/MDIX;
Port mirroring; Flow-based port mirroring; Broadcast storm control
Switch Fabric Capacity 136 Gb/s
Forwarding Rate 95 Mpps
Up to 8,000 MAC Addresses
Spanning Tree (IEEE 802.1D) and Rapid Spanning Tree (IEEE 802.1w) with Fast Link Support; Multiple spanning trees (IEEE 802.1s);
Supports Virtual Redundant Routing Protocol (VRRP); External redundant power support with PowerConnect
RPS-600 (sold separately); Cable diagnostics; SFP transceiver diagnostics
Static Routes; Routing Information Protocol (RIP) v1/v2; Open Shortest Path First (OSPF) v1/v2/v3; Classless Inter-Domain Routing
(CIDR); Internet Control Message Protocol (ICMP); ICMP Router Discover Protocol (IRDP); Virtual Redundant Routing Protocol (VRRP);
Address Resolution Protocol (ARP); Internet Group Management Protocol (IGMP) v2; Distance-Vector Multicast Routing Protocol
(DVMRP)
VLAN support for tagging and port-based as per IEEE 802.1Q; Double VLAN tagging (QinQ); Up to 4093 VLANs supported; Dynamic
VLAN with GVRP support
Layer 2 Trusted Mode (IEEE 802.1p tagging); Layer 3 Trusted Mode (DSCP); Layer 4 Trusted Mode (TCP/UDP); Advanced Mode using
Layer 2/3/4 flow-based Policies, including metering/rate limiting, marking and bandwidth guarantees; up to 100 ACLs can be used for
QoS flow identification via Class-maps; 8 Priority Queues per Port; Adjustable Weighted-Round-Robin (WRR) and Strict Queue Schedul-
ing; Port-based QoS Services Mode; Flow-based QoS Services Mode
Static IP Multicast; Dynamic Multicast Support – 256 Multicast groups supported in IGMP Snooping; IGMP snooping for IP multicast
support; IGMP Querier; Protocol Independent Multicast (PIM-DM, PIM-SM)
IEEE 802.1x-based edge authentication; Switch access password protection; User-definable settings for enabling or disabling Web, SSH,
Telnet, SSL management access; Port-based MAC Address alert and lock-down LLDP-MED; IP
Address filtering for management access via Telnet, HTTP, HTTPS/SSL, SSH and SNMP; RADIUS and TACACS+ remote a
uthentication for switch management access; Up to 100 Access Control Lists (ACLs) supported; up to 12 Access Control Entries (ACEs)
per ACL; SSLv3 and SSHv2 encryption for switch management traffic; Management access filtering via Management Access Profiles
IEEE 802.1x-based edge authentication; Switch access password protection; User-definable settings for enabling or disabling Web, SSH,
Telnet, SSL management access; Port-based MAC Address alert and lock-down LLDP-MED; IP Address filtering for management access
via Telnet, HTTP, HTTPS/SSL, SSH and SNMP; RADIUS and TACACS+ remote authentication for switch management access; Up to 100
Access Control Lists (ACLs) supported; up to 12 Access Control Entries (ACEs) per ACL; SSLv3 and SSHv2 encryption for switch
management traffic; Management access filtering via Management Access Profiles
Web-based management interface; Industry-standard CLI accessible via Telnet or Local Serial Port; SNMPv1, SNMPv2c and SNMPv3
supported; four RMON groups supported (history, statistics, alarms and events); TFTP transfers of firmware and configuration files; Dual
firmware images on-board; Multiple configuration file upload/download supported; Statistics for error monitoring and performance
optimization including port summary tables; BootP/DHCP IP address management supported; Syslog remote logging capabilities;
Temperature sensors for environmental monitoring
Approximate weight (without modules):
13.4 lbs, 6.06 kg Approximate weight (with
modules):13.7 lbs, 6.20 kg 440 x 387 x 43.2
mm(W x D x H); 17.3" x 15.2" x 1.7"; 1U, rack-
mounting kit included
RPS-600 Redundant Power Supply
EPS 470 Redundant Power Supply for POE models
SFP Optical Transceivers, 1000BASE-SX, LC Connector
SFP Optical Transceiver, 1000BASE-LX, LC Connector
CX-4 Module (Max. length supported is 12 meters)
XFP Module
10GBase -T Module
Stacking Module with 1 Meter Dell Stacking cable
3 meter stacking cable
Dell ™ PowerConnect
™
6224F
24 1000-SX or 1000-LX GigabitEthernet
ports; 4 Combo (SFP or10/100/1000)
Gigabit Ethernet ports;Up to 4 10-Gigabit
Ethernet Ports;
Distances:
1000BASE-SX: Up to 500m
1000BASE-LX: Up to 2 km
Approximate weight (without modules):
12.2 lbs, 5.54 kg Approximate weight (with
modules):12.6 lbs, 5.70 kg 440 x 387 x
43.2 mm(W x D x H); 1U, rack-mounting
kit included
Dell
™
PowerConnect
™
6248 & 6248P
48 10/100/1000BASE-T auto-sensing-
Gigabit Ethernet switching ports;4 SFP
combo ports for fiber mediasupport; 10
Gigabit Ethernet uplinkmodules (optional)
6248P: Up to 15.4 watts per port (with
optional external power supply) on all
48 ports
Switch Fabric Capacity 184 Gb/s
Forwarding Rate 131 Mpps
Up to 8,000 MAC Addresses
Approximate weight (without modules):
12.2lbs, 5.54 kg Approximate weight (with
modules):12.6 lbs, 5.70 kg 440 x 387 x
43.2mm (W x D x H); 1U, rack-mounting-
kit included