Dell PowerConnect 8024 Informacje o wersji - Strona 15

Przeglądaj online lub pobierz pdf Informacje o wersji dla Przełącznik Dell PowerConnect 8024. Dell PowerConnect 8024 20 stron. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Również dla Dell PowerConnect 8024: Informacje o wersji (27 strony), Podręcznik konfiguracji (21 strony), Aktualizacja oprogramowania sprzętowego (24 strony)

Dell PowerConnect 8024 Informacje o wersji

Layer 2

802.1AB (LLDP)
Description
TLV Information is flushed as soon as
power to the link partner is
disconnected.
LLDP-MED location and inventory
transmit TLVs have no effect.
802.1X
Description
Windows Vista® Authentication
RSTP blocked ports reporting
802.1X clients MAC do not appear in
the bridge address table.
VLAN
Description
vlan association mac command
limitations

Spanning Tree

Description
STP Topology change Notification
count is not showing in log
messages.
System Firmware Version 3.1.4.16
PowerConnect 8024/8024F Release Notes
User Impact
The remote information that should age out in 120 seconds will age out
when the port loses link. Currently no application features use these
entries. It is just information that is displayed.
The switch does not support configuring this data so enabling these
TLVs has no effect.
User Impact
The Windows Vista® client will fail to authenticate properly on subsequent
connections when the option to cache user credentials is selected.
Workaround:
In Control Panel  Network Connections, right-click on the
1.
desired Local Area Connection and select Properties.
2.
In the Properties window, select the Authentication tab.
3.
Deselect the checkbox for Cache user information for
subsequent connections to this network.
4.
Click OK.
Blocked STP ports will not show in the CLI command show spanning-tree
blocked ports.
Customers cannot see the authenticated clients MAC addresses in the
Forwarding Database but have to dump via show dot2x commands which
do not show a summarized table.
User Impact
The maximum number of MAC-based VLANs is 256.
User Impact
Log messages do not contain the topology count which is minimal impact.
Page 13