Dell PowerConnect B-DCX-4S Backbone Procedura wymiany - Strona 6

Przeglądaj online lub pobierz pdf Procedura wymiany dla Przełącznik Dell PowerConnect B-DCX-4S Backbone. Dell PowerConnect B-DCX-4S Backbone 6 stron. Power supply and filler panel
Również dla Dell PowerConnect B-DCX-4S Backbone: Procedura wymiany (16 strony)

Drukuj stronę

Replacing a power supply

1. Remove any filler panel.

2. Insert the power supply into the slot and push the handle up. Verify that the power supply is seated by gently

pulling on the

handle.

3. Tighten the thumb screw.

4. Replace the power cord.

5. Turn on the power switch.

6. Verify that the power LED on the power supply displays a steady green light.

Power Supply and Filler Panel Replacement Procedure

53-1001794-01