Dell PowerConnect PC7048P Instrukcje układania w stos - Strona 6
Przeglądaj online lub pobierz pdf Instrukcje układania w stos dla Przełącznik Dell PowerConnect PC7048P. Dell PowerConnect PC7048P 37 stron. Stacking gigabit ethernet switches
Również dla Dell PowerConnect PC7048P: Biała księga techniczna (34 strony)
Drukuj stronę
Stacking Dell PowerConnect 7000 Series Switches
Figure 2 shows a recommended stacking configuration with dual stacking modules on each switch. Each
switch connects to another with 128 Gbps of total bandwidth (4 ports @ 16 Gbps Tx and Rx each). Note
that in the recommended configuration, the dual stacking cables from each module both connect to
the same switch. In the not-recommended configuration, the dual stacking cables on switch 2, module
B and switch 3, module B connect to two different switches.
NOTE: To ensure full bandwidth when using redundant links between two switches, be sure not to split
the links across modules. Keep redundant links isolated to a single module on each end as shown in the
recommended configuration in Figure 2.
Dual Stacking Modules Configured in a Ring
Figure 2.
Recommended
Module
Module
A
B
a
Cables connected in a ring.
a
Dual stacking cables connect both ports
on a module to the same switch.
Switch
1
2
3
4
5
r
r
Not recommended
Module
Module
A
B
Cables not connected in a complete ring.
Dual stacking cables connect ports on a module to
two different switches.
Switch
1
2
3
4
5
Page 4