Dell PowerConnect PC7048R Instrukcje układania w stos - Strona 11
Przeglądaj online lub pobierz pdf Instrukcje układania w stos dla Przełącznik Dell PowerConnect PC7048R. Dell PowerConnect PC7048R 37 stron. Stacking gigabit ethernet switches
Również dla Dell PowerConnect PC7048R: Biała księga techniczna (34 strony)
Drukuj stronę
Stacking Dell PowerConnect 7000 Series Switches
Manual Update
You can perform firmware updates on the stack by using the CLI or the Web interface. From the CLI,
use the copy ftp command, which uses the FTP protocol for file transfer. To update the firmware by
using the Web interface, use the options available on the System > File Management > File Download
from Server page.
NOTE: When stacked, the PC7000 switches require that the same version of firmware be installed on
every switch member.
When connected in stack, the copy ftp or copy tftp commands will distribute the downloaded
image to all the connected units of the stack.
In the following output, the image with a file name of image.stk is downloaded from the FTP server
with an IP address of 10.27.64.141.
console#copy ftp ftp://10.27.64.141/image.stk image user admin password
test1234
Mode........................................... FTP
FTP Server IP.................................. 10.27.64.141
FTP Path.......................................
FTP Filename................................... PC7000_4.0.0.6.stk
Data Type...................................... Code
Destination Filename........................... image
Page 9