Entec HDBT100PL Podręcznik użytkownika - Strona 14

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przedłużacz Entec HDBT100PL. Entec HDBT100PL 16 stron. Hdmi/ir/rs232 twisted pair poc extender

Drukuj stronę
6. Troubleshooting & Maintenance
Problems
Output images in display
show with ghost
No output image when
switching
Cannot control the device
by control device (e.g. a
PC) through RS232 port
Cannot recognize device
connected
to
ETHERNET port
Static becomes stronger
when
connecting
video connectors
Cannot control the device
by RS232 / IR
If your problem persists after following the above troubleshooting steps, seek further
help from authorized dealer or our technical support.
HDMI/IR/RS232 Twisted Pair PoC Extender
Causes
Incorrect setting on the
display
A cable of bad quality
No signal at the input /
output end
Fail or loose connection
The extender is broken
Wrong
communication
parameters
The device has already
been broken
The connected device has
the
the same IP address with
the extender
Bad grounding
the
The device has already
been broken
Solutions
Check the display's setting
Try another high quality
connection cable
Check with oscilloscope or
multimeter if there is any
signal at the input / output
end.
Make sure the connection
is good
Send
dealer for repairing.
RS232
Make sure the RS232
communication
parameters are correct.
Send
dealer for repairing.
Change the IP address of
the
connected device.
Check the grounding and
make sure it is connected
well.
Send
dealer for repairing.
10
it
to
authorized
it
to
authorized
extender
or
the
it
to
authorized